Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
+ 2. Maintenance
- 3. Engines
   3.1.2. Identification number
   + 3.1.3. Engine
   3.1.4. Cars with the conditioner
   3.1.5. Lower cover of a motor compartment
   3.1.6. Covers of cast openings
   3.1.7. Natyazhitel of a chain
   + 3.1.8. Cover of a head of the block of cylinders
   + 3.1.9. Head of the block of cylinders
   + 3.1.10. Camshafts
   3.1.11. Hydraulic dish-shaped pushers
   3.1.12. Maslootrazhatelny caps
   3.1.13. Valves
   3.1.14. The directing valves
   3.1.15. Saddles of valves in a head of the block of cylinders
   3.1.16. Compression
   + 3.1.17. Maple belt
   3.1.18. Diagnostics of malfunctions (DB)
   3.1.19. General comments
   3.1.20. Repair work without dismantle of the engine
   - 3.1.21. Capital repairs of the engine
      3.1.21.2. Alternatives
      3.1.21.3. Dismantle of the engine
      3.1.21.4. Sequence of dismantling
   + 3.2. Diesel Engine (DE)
   3.2.3. Cars with the conditioner
   3.2.4. Lower cover of a motor compartment
   3.2.5. Covers of cast openings
   3.2.6. Natyazhitel of a chain
   + 3.2.7. Camshaft
   + 3.2.8. Head of the block of cylinders
   + 3.2.9. Maslootrazhatelny caps
   3.2.10. Cover of a head of the block of cylinders (2,2 / 2,5 l)
   3.2.11. Hydraulic dish-shaped pushers
   3.2.12. Valves
   3.2.13. The directing valves
   3.2.14. Saddles of valves in a head of the block of cylinders
   3.2.15. Head of the block of cylinders and motor block
   3.2.16. Compression
   3.2.17. Maple ridge belt
   3.2.18. The pulling device of a maple ridge belt
   3.2.19. Diagnostics of malfunctions (DD)
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries




3.1.21.3. Dismantle of the engine

GENERAL INFORMATION

If the decision on dismantle of the engine for carrying out capital repairs, or repair of the main knots was made, then it is necessary to hold certain preparatory activities.

It is extremely important to plan the place where works will be performed. Undoubtedly, the best place is the workshop. It is very important to have the equipped working platform, and also the place for storage of the car. If there is neither workshop, nor a garage, then the flat smooth concrete or asphalt platform will be required.

Washing of a motor compartment and the engine before demontazhy will allow to keep the tool clean and the constant working condition.

Also will be necessary the elevator or a telfer. Make sure that these devices have a stock on loading capacity and are capable to lift the engine with all units. Observance of security measures plays a paramount role as raising of the engine from the car – operation dangerous.

If works on dismantle of the engine are carried out by the inexperienced person, then the assistant is necessary. Consult and ask to help the persons having experience in such works. Many works when raising the engine from a motor compartment which exclude their performance by one person are reckoned.

In advance plan the actions. Agree or get all necessary tools and the equipment before beginning works. To some devices ensuring safety at dismantle and installation of the engine, and also decrease in labor costs strong supports, a full set of keys and mandrels, wooden blocks, rags and solvent for cleaning of inevitable pools from the spilled liquids belong (besides the elevator). If the elevator is hired, then agree in advance, having performed all works in which this mechanism is not necessary. It will allow to save money and time.

Keep in mind that considerable time you will not be able to use the car. For performance of some works inaccessible in house conditions due to the lack of the special equipment, it is necessary to address in a workshop of car service. These enterprises work according to the schedule and will be expedient to consult there before dismantle of the engine precisely to estimate expenses of time for repair and restoration of details.

Always at dismantle of the engine be very attentive. Rash actions can be the cause of serious injuries. In advance consider the actions. Do not feel sorry on it for time because the main thing – work without injuries.