Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car


Mercedes W202
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
- 13. Body
   13.2. Forward door
   13.3. Back door
   13.4. Handle of a forward door
   13.5. Handle of a back door
   13.6. Door lock
   13.7. Internal covering of doors
   13.8. Forward window regulator
   13.9. Glass of a forward window
   13:10. Back window regulator
   13:11. Glass of a forward door
   13:12. Window regulator engine
   13:13. Glove boxing
   13:14. Gear shifting handle sheeting
   13:15. Forward ashtray
   13:16. Average console
   13:17. Heating service panel
   13:18. Internal covering of the A-rack
   13:19. Internal covering of the S-rack
   13:20. Front seat
   13:21. Back seat
   + 13:22. Central lock
   13:23. External mirror / glass of a mirror
   13:24. A covering under the dashboard
   13:25. Front bumper
   13:26. Rear bumper
   13:27. Internal wing of the car
   13:28. Car wing
   13:29. Lattice Mercedes radiator / emblem
   13:30. Draft of a cowl of the engine
   13:31. A covering under a windshield
   13:32. The air supply device for heating of salon
   13:33. Catchment basin
   13:34. Paint and varnish covering
   13:35. Metal corrosion
   13:36. Automake-up
   13:37. What creaks?
   13:38. Hatch
+ 14. Electric equipment
+ 14.2. Electrical circuitries




13:27. Internal wing of the car

 Removal

PERFORMANCE ORDER
1. Note paint the provision of a forward wheel in relation to a nave. As a result the balanced wheel can be mounted in the same position. Weaken wheel bolts at the car standing on the earth. Raise the car in front and remove a forward wheel.
2. Weaken plastic nuts and bolts on noted places and take an internal wing.
3. Weaken nuts and bolts on the forward air duct and remove details.

Installation

PERFORMANCE ORDER
1. Check sealing rubber for durability of installation and damage, in case of need replace.
2. Establish and fix by detail bolts. In case of need at adjustment of a detail look on a niche of other forward wheel as details have to settle down.
3. Establish a forward wheel so that the markings put at removal coincided. Fasten a wheel. Lower the car and fix wheel bolts cross-wise with m 110 N.' moment.