Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
- 13. Body
   13.2. Forward door
   13.3. Back door
   13.4. Handle of a forward door
   13.5. Handle of a back door
   13.6. Door lock
   13.7. Internal covering of doors
   13.8. Forward window regulator
   13.9. Glass of a forward window
   13:10. Back window regulator
   13:11. Glass of a forward door
   13:12. Window regulator engine
   13:13. Glove boxing
   13:14. Gear shifting handle sheeting
   13:15. Forward ashtray
   13:16. Average console
   13:17. Heating service panel
   13:18. Internal covering of the A-rack
   13:19. Internal covering of the S-rack
   13:20. Front seat
   13:21. Back seat
   + 13:22. Central lock
   13:23. External mirror / glass of a mirror
   13:24. A covering under the dashboard
   13:25. Front bumper
   13:26. Rear bumper
   13:27. Internal wing of the car
   13:28. Car wing
   13:29. Lattice Mercedes radiator / emblem
   13:30. Draft of a cowl of the engine
   13:31. A covering under a windshield
   13:32. The air supply device for heating of salon
   13:33. Catchment basin
   13:34. Paint and varnish covering
   13:35. Metal corrosion
   13:36. Automake-up
   13:37. What creaks?
   13:38. Hatch
+ 14. Electric equipment
+ 14.2. Electrical circuitries




13:11. Glass of a forward door

GENERAL INFORMATION

Prevention

Some instructions on work are in more detail stated in subsection 13.8., therefore we recommend to re-read this section. For a window of a back door act as appropriate.



Removal

PERFORMANCE ORDER
1. Remove an internal covering of a door.
2. Carefully remove the pressurizing film in the lower area.
Prevention

The film is easily torn.


3. Completely lower glass down.
4. Wring out the internal sealing tire of a window from a doorframe a wide plastic wedge up. At the same time dispose an assembly wedge perhaps closer to the holding clips. Clips remain on a door.
5. In the same way wring out the external sealing tire okna.17. Slightly Raise a window up. Turn off in front a nut from the tire of a window regulator and disconnect the window regulator lever.
6. Extract glass, rejecting forward, up from a doorway.

Installation

PERFORMANCE ORDER
1. Insert glass from above into a doorway and carefully lower down.
2. Advance glass from below up and insert into the directing tire and crackers.
3. Insert the forward lever of a window regulator into the lifting tire and screw up, without tightening. The nut drags on only after door glass adjustment.
4. Insert sealing tires in front into a doorframe.
5. Adjust door glass.
6. Attach the pressurizing film, having tracked that there were no folds.
Prevention

Do not damage a film – it has to provide faultless sealing.


7. Establish an internal covering of a door.