Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
- 14. Electric equipment
   14.1.2. Measuring devices
   14.1.3. Technology of measurements
   14.1.4. Checks of electric equipment
   14.1.5. Sound signal
   14.1.6. Replacements of safety locks
   + 14.1.7. Rechargeable battery
   + 14.1.8. Generator
   + 14.1.9. Starter
   14.1.10. Traction relay
   - 14.1.11. System of lighting
      14.1.11.1. Lamps of passing, driving and fog beam
      14.1.11.2. A lamp in a forward lamp of the index of turn
      14.1.11.3. A lamp in a back lamp
      14.1.11.4. A lamp in a lamp of illumination of registration plate
      14.1.11.5. A plafond in salon
      14.1.11.6. Lamp of the index of turn
      + 14.1.11.7. Headlight
      14.1.11.8. Back lamp
   14.1.12. Devices
   14.1.13. Dashboard
   14.1.14. Glow lamps on the dashboard
   14.1.15. Light switch
   14.1.16. Radio receiver
   + 14.1.17. Antenna
   14.1.18. Loudspeakers
   + 14.1.19. Rubber brushes of screen wipers
   14.1.20. Windscreen washer jets
   14.1.21. The washing nozzles of headlights
   14.1.22. Screen wiper and its engine
   14.1.23. Protect the car
   14.1.24. Anticreeping "immunodeficiency"
   14.1.25. Why headlights grow dull
   14.1.26. Galogenka
+ 14.2. Electrical circuitries




14.1.11.8. Back lamp

Removal

PERFORMANCE ORDER
1. Take a floor covering from a luggage carrier.
2. Dismantle an internal upholstery around a back lamp.
3. Remove the shtekkerny socket below on the lamp holder.

Installation

40. Shtekkerny socket
41. Lamp holder
42. Nuts
43. Reflector
44. Lamp glass
45. Consolidation

PERFORMANCE ORDER
1. Check consolidation for lack of porosity and damages, if necessary replace it.
2. Insert glass of a back lamp together with consolidation outside into a body.
3. Press a reflector and evenly hardly tighten fixing nuts.
4. Insert the lamp holder and record him, rotating the plastic handle to the right.
5. Get the plug on the socket.
6. Mount an internal upholstery.
7. Turn horizontally plastic handle on a back lamp and remove the lamp holder.
8. Unscrew fixing nuts (42).
9. Extract outside glass of a back lamp (44) together with consolidation (43), remove a reflector inside.