1. Disconnect a weight wire from the plug of the rechargeable battery.
Prevention
At the same time the anticreeping code of radio is erased.
|
2. Remove the protection cover under a guard of devices. |
3. Pull down a hand the handle of management to light switch. |
4. Extend the glow lamp (51). |
5. Unscrew a nut (52) and remove the protection cover (53). |
6. Disconnect the regulator of a tilt angle of an optical axis of headlights (54) from spring clips. |
7. Turn the switch of light (S1) to the left and Take it down. At installation pay attention to the correct landing of lock ledges. |