Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
- 2. Maintenance
   + 2.1.1. Engine
   2.2. In addition through each 60 000 km of a run
   2.3. Every 2 year
   2.4. Every 3-4 year
   - 2.5. Works on maintenance
      + 2.5.1. Engine and system of production of exhaust gases
      + 2.5.2. Box predach/main transfer
      - 2.5.3. Peredny Bridge / Steering
         2.5.3.1. Check of hinges of the forward bridge
         2.5.3.2. Check of a free wheeling of a steering wheel
         2.5.3.3. Pulling up of fixing bolts on the steering mechanism
         2.5.3.4. Check of level of oil
      + 2.5.4. Brakes / tires
      + 2.5.5. Body / internal lighting
   + 2.6. Care of the car
   2.7. Start of the engine from the auxiliary accumulator
   2.8. Towage of the car
   2.9. Raising of the car
   2.10. The tools used to maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries




2.5.3.4. Check of level of oil

Check of level of oil in the steering mechanism with the amplifier

PERFORMANCE ORDER
1. Unscrew a carving stopper and uncover a receiver.
2. Oil level if oil cold (ambient temperature about +20 °C) has to be in a receiver between the marks "min" and "max".
3. If it is required, add oil for the steering mechanism of Mercedes-Benz N 000 989 88 03.
Prevention

Essentially add only new oil as the smallest pollution can already lead to emergence of malfunctions in work of hydraulic system.


4. Check for lack of porosity or damage a sealing ring on a cover.
5. Lay a cover for a pump housing and fix it by a carving stopper.
6. Then at the working engine turn several times a steering wheel from an emphasis against the stop, thanks to it from system air is removed.

Check of level of oil (liquid for hydraulic systems) in system of regulation of a road gleam / automatically blocked differential

PERFORMANCE ORDER
1. Install the car on a plain surface.
2. Check oil level at the stopped engine.
2a. Open a cover and extend it together with the index of level of oil (2a).
2b. Wipe this index a bezvorsisty rag and again insert it against the stop on the former place.
2 century. Extend a masloizmeritelny core and consider oil level. It has to be between the marks "min" and "max".
3. If it is necessary to add liquid for hydraulic systems, then apply a pure funnel (60) and a close-meshed sieve.
Prevention

It is possible to apply only the liquids resolved by the plant to hydraulic systems, for example, of Mercedes-000 989 91 03/10.