Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
- 2. Maintenance
   + 2.1.1. Engine
   2.2. In addition through each 60 000 km of a run
   2.3. Every 2 year
   2.4. Every 3-4 year
   - 2.5. Works on maintenance
      + 2.5.1. Engine and system of production of exhaust gases
      + 2.5.2. Box predach/main transfer
      - 2.5.3. Peredny Bridge / Steering
         2.5.3.1. Check of hinges of the forward bridge
         2.5.3.2. Check of a free wheeling of a steering wheel
         2.5.3.3. Pulling up of fixing bolts on the steering mechanism
         2.5.3.4. Check of level of oil
      + 2.5.4. Brakes / tires
      + 2.5.5. Body / internal lighting
   + 2.6. Care of the car
   2.7. Start of the engine from the auxiliary accumulator
   2.8. Towage of the car
   2.9. Raising of the car
   2.10. The tools used to maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries




2.5.3.1. Check of hinges of the forward bridge

PERFORMANCE ORDER
1. Raise in front the car.
2. Light with a lamp dustproof caps of the axial hinge (7) at the left and on the right and check them for absence of damage, at the same time pay attention to lubricant traces on cuffs and around them.
3. Light with a lamp dustproof caps of the directing hinge at the left and on the right and check them for absence of damage, at the same time pay attention to oil traces on cuffs and around them.
4. At damage of a dustproof cap, for safety replace the corresponding hinge together with a dustproof cap. The got dirt for certain destroys the hinge.
5. Check a side play of the directing hinge of the top cross lever of a suspension bracket (6). For this purpose with a force pull and press a forward wheel and at the same time feel a finger the ball hinge. If the side play is available, replace the top cross lever of a suspension bracket.

Prevention

When carrying out this test the hinge has to be unloaded (the car поддомкрачен).


6. Check a gap of the axial hinge (7). For this purpose press from below (shooter) in the direction of the cross lever of a suspension bracket (4).
7. In auto repair shop use the special tool to verification of a side play. If the side play is available, replace the simple hinge.
8. Check rigidity of landing of fixing nuts of the simple and directing hinges, but at the same time do not turn them.