Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car

Theory. If you decided to buy the second-hand foreign car and chose concrete model, then try to collect about it information maximum in advance. It is the best of all to make it, having examined similar model in salon which trades in new cars. First of all find out where there has to be identification number (VIN). At the car can be additional VIN овские stickers (are carried out as transfers), – learn where they are placed.

Practice. So, you start survey of the chosen car. It should be begun with check of a condition of a paint and varnish covering about identification numbers. It should not differ on color and the invoice from a covering on inside of a luggage carrier, a cowl, motor compartment. A soft surface (there is a deformation trace even from a nail), begin to flow paints and unevenness of its drawing – all this demonstrates that the place where there is identification number, was recoloured. And repaint hides either consequences of accident, or traces of change of number. The covering near number can be rubbed the tampon moistened with solvent: if paint is dissolved at least partially, it is a sure sign of the fact that it is "not native".

Now directly about numbers and identification plates. If number is changed, there are characteristic signs of this operation: the surface of metal is most often deformed, slightly convex or bent. At a handicraft way of thrashing the double contour is swept often up; signs are not on one straight line, and "jump", they have various depth of cave-in; between letters or figures – intervals of different size. Pay special attention to identical signs. They should not differ from each other in a form or the sizes. One more important point: if on identical signs in numbers you noticed any characteristic – be sure that these signs not factory. Company number is put with a uniform stamp, "handicraftsman" for each figure or a letter uses a separate brand and repeats characteristic "mistake".

It is more difficult to reveal the "criminal" car when number is replaced together in a detail or that its part on which it is beaten out. As a rule, in this case number – factory. Therefore it is necessary to examine places of fastening of this detail to a body. The prostukivaniye can be an easy way of detection of such replacement. Has to guard you if a sound at a prostukivaniye deaf, "wooden" or jingling. It is worth remembering that in cars separate parts of a body fasten by method of contact welding. Junctions usually represent points with a diameter of 5-6 mm. If in places of fastening of a "number" detail to a body there are traces of other type of welding, and their surface also are deformed – means, the detail is fixed on a body not in the factory way.

At survey of the engine pay attention to the platform with number: it has to be equal, and signs on it are beaten out accurately and brightly, without double contours. By the way, the platform is pierced on the milling machine from which there are traces in the form of polukruzhiya. They are well visible even at strong corrosion.

It is rather simple to reveal the described signs even to the nonprofessional. There are also others, but they can be revealed only by experts. Also it is worth addressing them if you had doubts.