Mercedes W202
+ 1.2. General information
- 2. Maintenance
+ 2.1.1. Engine
2.2. In addition through each 60 000 km of a run
2.3. Every 2 year
2.4. Every 3-4 year
+ 2.5. Works on maintenance
- 2.6. Care of the car
2.6.2. Care of the painted surfaces
2.6.3. Care of plastic details
2.6.4. Care of glasses and rubber consolidations
2.6.5. Care of light-alloy wheels
2.6.6. Seat belts
2.6.7. Anticorrosive protection
2.6.8. Preservation of a motor compartment
2.6.9. Care of an upholstery of chairs
2.7. Start of the engine from the auxiliary accumulator
2.8. Towage of the car
2.9. Raising of the car
2.10. The tools used to maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries
|
For prevention of emergence of corrosion in a forward part of the car, for example, on sidewalls, longerons or on a protective guard and the driving unit carry out splashing of high-quality conservation wax in a motor compartment, including the details of system of braking which are in a motor compartment, and also elements of the forward bridge and a control system. First of all, it is made, of course, after washing of the engine.
Prevention
Before washing of the engine which can be seen off, for example, by means of the low-temperature clearing means or a steam-ejecting injector close plastic covers the generator, blocks of safety locks and a tank of the hydraulic brake drive.
|
|