Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
- 2. Maintenance
   + 2.1.1. Engine
   2.2. In addition through each 60 000 km of a run
   2.3. Every 2 year
   2.4. Every 3-4 year
   - 2.5. Works on maintenance
      + 2.5.1. Engine and system of production of exhaust gases
      + 2.5.2. Box predach/main transfer
      + 2.5.3. Peredny Bridge / Steering
      + 2.5.4. Brakes / tires
      - 2.5.5. Body / internal lighting
         2.5.5.1. Replacement of a nozzle of the pylezaderzhivayushchy filter
         2.5.5.2. Cowl lubricant
         2.5.5.3. Check of seat belts
         2.5.5.4. Hatch lubricant
   + 2.6. Care of the car
   2.7. Start of the engine from the auxiliary accumulator
   2.8. Towage of the car
   2.9. Raising of the car
   2.10. The tools used to maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries




2.5.5.1. Replacement of a nozzle of the pylezaderzhivayushchy filter

GENERAL INFORMATION

The Pylezaderzhivayushchy filter cannot be cleaned. Within maintenance the filter should be replaced every time.

The Pylezaderzhivayushchy filter is installed behind the fan.
PERFORMANCE ORDER
1. Remove the ventilating protection cover in the right space for legs, previously turn a fixing spring clip on 1/4 turns.
2. Unscrew and remove the protection cover under glove boxing back.
3. Wring out a spring latch and reject a cover back.
4. Extend the pylezaderzhivayushchy filter (1) in the direction of an arrow down.
5. Insert the new filter.
6. Insert a cover. For this purpose displace in the direction of an arrow both fixing a clip (3).
7. Establish and screw the lower cover of a motor compartment.
8. Install the ventilating protection cover and turn by 90 degrees (1/4 about.) fixing spring clip.