Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
- 2. Maintenance
   + 2.1.1. Engine
   2.2. In addition through each 60 000 km of a run
   2.3. Every 2 year
   2.4. Every 3-4 year
   - 2.5. Works on maintenance
      - 2.5.1. Engine and system of production of exhaust gases
         + 2.5.1.1. Replacement of engine oil
         2.5.1.2. Check of a condition of a maple belt
         2.5.1.3. Replacement of spark plugs
         2.5.1.4. Check of electric connections
         2.5.1.5. Lubricant of a control system of a butterfly valve
         + 2.5.1.6. Check of level of cooling liquid
         2.5.1.7. Conditioner: check of level of coolant
         2.5.1.8. Replacement of the fuel filter / filter of rough cleaning
         2.5.1.9. Replacement of a replaceable element of the vozdushky filter
         2.5.1.10. Check of system of production of exhaust gases
      + 2.5.2. Box predach/main transfer
      + 2.5.3. Peredny Bridge / Steering
      + 2.5.4. Brakes / tires
      + 2.5.5. Body / internal lighting
   + 2.6. Care of the car
   2.7. Start of the engine from the auxiliary accumulator
   2.8. Towage of the car
   2.9. Raising of the car
   2.10. The tools used to maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries




2.5.1.9. Replacement of a replaceable element of the vozdushky filter

GENERAL INFORMATION

Replacement requires no special tool.

It is necessary to buy the following quickly wearing out detail:

 – replaceable element of the air filter. Upon its purchase pay attention to compliance of engine capacity.
PERFORMANCE ORDER
1. Uncover the air filter. For this purpose open high-speed locks (shooters).
2. Take the filtering element. At the same time take the filtering element for paper folds without the punched leaf. Do not use any tool.
3. Wipe the filter case a rag.
4. Insert the new filtering element into the case of the air filter. Sealing rubber has to adjoin densely from all directions.
5. Check consolidation on a cover of the air filter for absence of damage, if necessary – replace.
6. Spread a cover and latch high-speed locks.