Mercedes W202
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
- 7. System of ignition
7.2. Safety measures at repair of electronic system of ignition
7.3. Ignition coils
+ 7.4. Spark plugs
- 7.5. Device of a preliminary warming up of the diesel
- 7.5.1. Check of the device of a preliminary warming up
7.5.1.1. Glow lamp
7.5.1.2. Anchor
7.5.1.3. Glow plugs
7.5.1.4. Temperature sensor of cooling liquid
7.5.1.5. The thermal sensor of the soaked-up air
7.5.2. Self-diagnostics of the device
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries
|
Connecting elements of the relay of management of a warming up N 14
30 – plug 30, current of long loading
31 – the plug 31, the case (–)
50 – the plug 50, tension when pressing a starter
LA – the plug of a control bulb of a warming up |
15 – the plug 15, tension at the included ignition
G1–G5 = connection of candles of an incandescence 1–5 |
| PERFORMANCE ORDER |
| 1. Connect the voltmeter between the plug 30 (A) of the plug of the relay of management of a warming up and the case. The measuring device has to show tension of the rechargeable battery (about 12 V). |
|
2. Otherwise check the red wire going from a connecting block (X12/3) to the relay of management of a warming up for break. |
| 3. Turn the ignition key on a warming up and connect the voltmeter on a counter 1 (plugs 15) of the 6-shtyrkovy plug and the case. Preset value: tension of the rechargeable battery (about 12 V). If tension is absent, then check for break it is black / a red wire from a safety lock 23 (the unprotected party) to the plug, a counter 1. |
| 4. Connect the voltmeter to a counter 1 (+, the plug 15) and a counter 4 (–, the plug 31). Preset value: tension of the rechargeable battery (about 12 V). Otherwise check for break a brown wire from a counter 4 on the case. |
|
|
|